Advertisement
DL380 Gen 10 AI Server
2
Initial installation and configuration
This chapter describes the initial server configuration and the installation of NVIDIA drivers
and tracking and recognition service (TRS) dependencies on the DL380 AI Server.
Prerequisites
–
–
Procedure
To perform the initial configuration and installation, you have to do following steps:
1.
2.
3.
4.
5.
6.
Note: For information on how to add the DL380 Gen 10 AI Server to BVMS (BVMS version 10.0
or later), see the BVMS Configuration manual. For detailed information, see section Person
Identification Settings Page in the manual.
2.1
First start and initialization
When you start the server for the first time, the YaST2 Installation Wizard is displayed.
Use the respective functional keys to navigate through the Wizard, for example:
Key
F1
F8
F9
F10
Bosch Security Systems B.V.
Before starting the configuration, make sure that the DL380 Gen 10 AI Server is installed
according to the HPE instructions.
To install the NVIDIA drivers and TRS packages, you need an internet connection.
First start and initialization, page 5 .
Loging in to the server, page 12 .
Downloading and installing NVIDIA drivers and TRS software packages, page 12 .
Configuring host name, page 13 .
Enabling TRS, page 14 .
Restarting the server, page 14
Quick installation guide
Initial installation and configuration | en
Function
Help
Back
Abort/Cancel
Next/OK
5
2020.08 | V2 | DOC
Advertisement
