Table of Contents
Advertisement
24
en | System Setup – first Steps
–
–
–
To start the IP Helper tool:
1.
2.
3.
5.4
Standard system configuration
The system is delivered with the fully configured iSCSI target and pre-configured LUNs.
The default target name is TG0 and holds all of the iSCSI LUNs.
The naming convention for the LUNs is VHDxx.vhdx where <xx> ranges from 01 up to <n>
depending on the system used. The default setup allows every iSCSI Initiator (iSCSI host) to
connect to the system.
The system comes with iSCSI Target Service enabled.
Notice!
On empty systems you must set up the iSCSI target and the iSCSI LUNs of the drives
manually after initial RAID configuration.
2016.08 | V2.1 | DOC
in the online catalog on the DIVAR IP 6000 product page
under http://mydivar.com
under http://downloadstore.boschsecurity.com/
Double-click iphelper.exe.
A dialog box opens that displays all IP devices with their IP addresses located in the
network. Search for the devices whose network settings you want change.
Change the IP address.
Installation Manual
DIVAR IP 6000 (2U)
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
