Configuration - Alcatel-Lucent OmniTouch 8082 User Manual

Configuration

9.6
Configuring the application on the PC.

The application is ready to work but it is recommended to check the application
default configuration.
1) Open the application configuration : in the task bar of your PC, select the "Settings" menu of the
synchronization menu.
2) You can define :
Besides Settings item, there are a few item that allow you to display the last
synchronization summary, to create or delete a pairing between your phone and
your PC, to open the application online help, to display information on the
application version or to exit the application.
•
The profile and the Outlook folder to use for synchronizing
contacts.
The default profile and Outlook folder will be used for
synchronizing unless you specify a folder and profile.
You can change the profile and folder used. You can define a
profile for synchronizing the contacts. You are advised to create
an Outlook subfolder dedicated to your phone contacts and to
work from this folder. This will help protect your general Outlook
contacts on your PC.
•
Date range for synchronizing: only events during this period
will be synchronized.
•
The conflict policy (determines how the application should
behave when different changes have been made on the
phone and the PC)
- the most recent modification replaces the oldest,
- the phone datas always replace the ones on the PC,
- the PC datas always replace the ones on the Phone,
- the modified datas on the phone are copied on the PC and
modified datas on the PC are copied on the phone (the datas
are duplicated),
- no synchronisation is done.
•
The silent sync : you can choose to display or not the
synchronization progress bar and the synchronization
summary.
•
The port used by PC for synchronization : if default port
cannot be used on the PC you can change it.
If you modify the port used by the application, you have to do the
same modification on the phone side.
•
URL for downloading the application updates.
•
Startup: if enabled, the application will be run when
Windows® starts
52