Install The Alcatel-Lucent Ip Touch Bluetooth® Wireless Handset - Alcatel-Lucent OmniTouch 8082 User Manual

After pairing the Bluetooth accessory, you must define the accessory type in the audio settings.
Select the application
Settings
Device
Audio
Accessory type
BT
Ok
After selecting the accessory type, you must specify the jack accessory:
Jack accessory
• headset
• handsfree
• loudspeaker
Ok
Install the Alcatel-Lucent IP Touch Bluetooth® Wireless handset
7.14
Select the application
Settings
Device
Bluetooth
Add device
Scan
The set scans for available Bluetooth devices...
Your Bluetooth® device needs to be prepared for pairing. Take the handset off the
hook and long press on both handset buttons at the same time. You will hear a 3-
note tone and the LED will flash green and orange.
Searching for Bluetooth® equipment. Wait for the detected equipment type and
address to be displayed
Select the relevant equipment
Add the device to the device list
Enter the device PIN code (The default PIN code is 0000)
Ok
The 3-note tone indicates that the handset has been installed correctly (the LED
flashes green or orange depending on the battery charge level)
38