web viewer
CONNECTING WEB VIEWER
1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
`
You must have specified the IP address in "Network >
Connection Mode".
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
For more information, refer to "Network Configuration > DDNS". (Page 72)
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
`
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
`
M
It allows up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
The default ID of the admin account is "admin", and the default password is "4321".
`
Password of the Admin and general users can be changed in <Permission Management> menu of the NVR.
`
Normal users should have set <Webviewer> under <Restriction on Network Access> to "Use" before connecting to the
Web Viewer. (Page 46)
`
All settings are applied by the NVR's settings.
3. Click <Install ActiveX Control...>.
4. Click <Install>.
5. You may have "Windows Security Alert" that attempts to
block this with the Windows Firewall. In that case, click
<Unblock> to start Web Viewer.
6. Installation is complete.
Now you can see the main screen of Live Viewer.
82_ web viewer