Samsung SRN-470D User Manual page 53

4. Provide the <ID> and <Password> for the selected network camera.
5. Press <Register> to register the selected camera.
To manually search for and register a network camera
1. Press <Add Manually> in the bottom left corner of the "Add Camera Automatically" window.
2. The Manual Search window appears.
3. Select a protocol.
The input items may differ depending on the selected protocol..
• SAMSUNG : Comply with the internal network protocols adopted by Samsung Techwin.
• RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.
4. If you select the <SAMSUNG> protocol, check options as necessary.
• Model : Select a camera model.
- SVNP : Indicate a network camera that complies with SVNP protocols of Samsung Techwin. If you want to
connect a camera that is not displayed in the camera list, select a SVNP model name.
`
However, you must select the correct model name of the camera, if it's in the list. Some of obsolete camera models may not be
supported.
• Address type: Select an address type of the camera.
- Static : Used to provide the IP address of the camera manually.
- iPOLiS DDNS : This is available only if the camera is registered with the iPOLiS DDNS(www.samsungipolis.
com) server. Provide the registered domain for DDNS ID.
`
Ex) http://www.samsungipolis.com/snb5000 -> provide "snb5000" for iPOLiS DDNS
- MAC (Samsung) : Available if the camera supports the MAC Address-based DDNS.
- URL : Used for URL address input.
M
`
Refer to the user manual of the connected camera and check the DDNS specification that is supported by the camera.
• IP : Provide the IP address of the camera.
• Device Port : Provide the device port of the camera.
• HTTP Port : Provide the HTTP port of the camera.
• ID : Provide the ID of the camera that you want to register.
English _53