Samsung SRN-470D User Manual page 69

Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection
mode.
When no router is used
• Static IP mode
- Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
NVR and remote user.
- NVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected NVR to
<Static IP>.
`
Consult your network manager for IP, Gateway and Subnet Mask.
• Dynamic IP (DHCP) mode
- Internet connection : Connect the NVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- NVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected NVR to
<Dynamic IP>.
• ADSL (PPPoE: ID and password certification)
- Internet connection : An ADSL modem is directly connected to the NVR, where the ADSL connection
requires user ID and password.
- NVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected NVR to
<ADSL>.
`
ADSL <User ID> and <Password> should be the same to the ADSL user information.
If you don't know the ID and password, consult your ADSL service provider.
English _69