Connecting The Power Cord; Playback - Denon AVR-X2000 Owner's Manual

Contents
%
• When using this unit, we recommend you use a
router equipped with the following functions:
• Built-in DHCP server
This function automatically assigns IP addresses on
the LAN.
• Built-in 100BASE-TX switch
When connecting multiple devices, we recommend
a switching hub with a speed of 100 Mbps or
greater.
• Use only a shielded STP or ScTP LAN cable which is
easily available at electronics stores (CAT-5 or greater
recommended).
• The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used,
other devices could be affected by noise.
NOTE
• The types of routers that can be used depend on the
ISP. Contact your ISP or a computer shop for details.
• This unit is not compatible with PPPoE. A PPPoE-
compatible router is required if you have a contract
for a type of line set by PPPoE.
• Do not connect an NETWORK connector directly to
the LAN port/ Ethernet connector on your computer.
Front panel Display
Connections

Playback

Connecting the power cord

After completing all the connections, insert the power plug into the power outlet.
Rear panel
Settings
To household power outlet
(AC 230 V, 50/60 Hz)
40
Remote
Tips Appendix
Power cord (supplied)
Index