Quick Select Function; Calling Up The Quick Select; Changing The Settings - Denon AVR-X2000 Owner's Manual

Contents

Quick select function

You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons.
You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once.
By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.

Calling up the Quick Select

1
Press QUICK SELECT.
The Quick Select settings for the button you pressed are called up.
• The default settings of each Quick Select function are as shown below.
Button
QUICK SELECT 1
QUICK SELECT 2
QUICK SELECT 3
QUICK SELECT 4
Front panel Display
Connections Playback
Input source Volume
CBL/SAT 40
Blu-ray 40
GAME 40
NETWORK 40
Rear panel
Settings

Changing the settings

1
Set the items below to the settings you want to save.
z
q Input source (vpage 42)
w Volume (vpage 43)
e Sound mode (vpage 94)
r Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®,
Audyssey Dynamic Volume®) (vpage 128)
2
Press and hold the desired QUICK SELECT until "Quickz
Memory" appears on the display.
The current settings will be memorized.
z The number for the QUICK SELECT button you pressed is displayed.
2 Changing the Quick Select Name
You can change the Quick Select names displayed on the TV or unit of
this display to the desired names.
For the name change method, see "Quick Select Names"
(vpage 161).
107
Remote
Tips Appendix
Index