Denon AVR-X2000 Owner's Manual page 118

Contents
2 Network
Setting items
Information
IP Control
Friendly Name
Settings
Diagnostics
Maintenance Mode
2 General
Setting items
Language
ZONE2 Setup
Lch Level
Rch Level
Volume Level
Volume Limit
Power On Volume
Mute Level
Zone Rename
Quick Select Names
Auto Standby
Front Display
Front panel Display
Connections Playback
Display network information.
Enables network communication in standby power mode.
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name
according to your preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Denon service engineer or custom installer.
Sets the language for display the menu on the TV screen.
Makes settings for audio playback with multi-zone (ZONE2).
Adjust the left channel output level.
Adjust the right channel output level.
Set the volume output level.
Make a setting for maximum volume.
Define the volume setting that is active when the power is turned on.
Set the amount of attenuation when muting is on.
Change the display title of each zone to one you prefer.
Change the "Quick Select" display title to one you prefer.
Sets the time for switching to auto standby when there are no audio or video signals input into this unit.
Makes settings related to the display on this unit.
Rear panel
Settings
Description
Description
118
Remote
Tips Appendix
Page
Page
Index
156
156
156
157
158
159
160
160
160
160
160
161
161
161
161
161
162
162