Care And Cleaning - Dishlex DX 301 User Manual

• There can be water on the sides and door of the
appliance. Stainless steel becomes cool more quick-
ly than the dishes.

Care and cleaning

Warning! Switch the appliance off before you
clean it.
Cleaning the filters
Important! Do not use the appliance without the filters.
Make sure that the installation of the filters is correct.
Incorrect installation will cause unsatisfactory washing
results and damage to the appliance.
1
3
To remove filters B and
C, turn the handle ap-
proximately 1/4 anti-
clockwise.
12
2
Fully clean the filters A, B
and C below running wa-
ter.
4
Remove the flat filter A
from the bottom of the ap-
pliance.
5
Put the filter A in the bot-
tom of the appliance. In-
stall the flat filter correctly
under the two guides D.
Important! Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a cocktail stick.
External cleaning
Clean the external surfaces of the appliance and con-
trol panel with a damp soft cloth. Only use neutral de-
tergents. Do not use abrasive products, scouring pads
or solvents (acetone etc.).
Internal cleaning
Do an inspection at intervals of 3 months. Set a washing
program for heavily soiled dishes. Use detergent, but
do not put dishes in the appliance.
Long periods of non-operation
Do these steps when you do not use the appliance for
a long period:
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Keep the door open to prevent unpleasant smells.
4. Keep the inner side of the appliance clean.
Frost precautions
Caution! Do not install the appliance where the
temperature is below 0 °C. The manufacturer is
not responsible for damage because of frost.
6
Put the filter system in po-
sition. To lock the filter
system, turn the handle
clockwise until it locks in
position