What To Do If; Moving The Machine - Dishlex DX 301 User Manual

If not possible, empty the appliance and close the door.
Disconnect the water inlet hose and remove water from
the water inlet hose.

Moving the machine

Do these steps to move the appliance:

What to do if...

The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem
yourself. Refer to following charts. If you cannot find a
solution to the problem yourself, contact your dealer or
the Customer Care Centre.
Fault code and malfunction
• the digital display shows
The appliance does not fill with water
• the digital display shows
The appliance will not drain
• the digital display shows
The anti-flood device operates
The program does not start
After the check, switch on the appliance. The program
continues from the point of interruption. If the malfunc-
tion shows again, contact your Customer Care Centre.
If the display shows a fault code, not described in the
chart, contact your Customer Care Centre.
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Remove the appliance and the hoses.
4. Do not tilt the appliance during transport.
Warning! Switch the appliance off before you do
the suggested corrective actions.
Possible cause and solution
• The water tap is blocked or restricted with limescale.
Clean the water tap.
• The water tap is closed.
Open the water tap.
• The filter in the water inlet hose is blocked.
Clean the filter.
• The installation of the water inlet hose is not correct. The hose
can be kinked or squashed.
Make sure that the installation is correct.
• There is a blockage in the sink spigot.
Clean the sink spigot.
• The installation of the water drain hose is not correct. The hose
can be kinked or squashed.
Make sure that the installation is correct.
• Close the water tap and contact your Customer Care Centre.
• The appliance door is not closed.
Close the door.
• Mains plug is not connected.
Plug-in appliance to the mains.
• The fuse has blown out in the household fuse box.
Replace the fuse.
• Delay start is set.
Cancel the delay start to start the program immediately.
These data are necessary to help you quickly and cor-
rectly:
• Model (Mod.)
• Product number (PNC)
• Serial number (S.N.)
13