Preparing Scale For Weighing - Taylor TE30WD Instruction Manual

PREPARING SCALE FOR WEIGHING

Before Weighing
1. Please select the scale's channel to match the wireless
display. (The scale's channel indicator is located on the
scale's base; please remove the rubber stopper to access
the channel
display is
scale.(Please see Page 6 for instructions for selecting
platform channels.)
2. Press the ON/OFF button to turn on the scale.
3. Please make sure that the distance between the scale
base and the
meters).
Note: If the scale's channel is not same as the wireless
display, '88888'will appear on the display. Set the scale
and wireless display to the same channel.
Weighing
1. Press the ON/OFF button to turn on the scale.
2. '88888' appears on the screen, then '0' and '
flash. The scale is ready for weighing.
*NOTE- If the "88888" display does not show '01, press the
button to change the wireless display's channel to
match the scale's channel. For example: If the scale's
channel is set to Channel-1, please select Channel-1 for
the wireless display also.
4
indicator.)For
using Channel-1,
wireless
example:
select
display is
If the
Channel-1
within 30
wireless
for the
feet (10
'will