Taylor TE10C Instruction Manual

Troubleshooting
• If there are no items on the platform, but the LCD does not
show zero, press the "On/Zero" key to reset the scale to
zero.
• Overload Warning: Should "Err" appear on the display
during a weighing, this indicates that the maximum
weighing capacity of the scale has been exceeded. Remove
the weight immediately; otherwise, permanent damage
could occur.
Precautions
This scale is engineered to give you years of satisfactory service if you
handle it carefully. Here are a few precautions:
1. Always read instructions thoroughly to ensure that you have the full
benefit of all the unit's features.
2. DO NOT immerse unit in water, as doing so will cause damage to
internal components and void the warranty. If you spill liquid on it,
dry it immediately with a soft, lint-free cloth.
3. DO NOT clean the unit with an abrasive or corrosive material. This
may scratch the plastic parts and corrode the electronic circuits.
4. DO NOT subject the units to excessive force, shock, dust,
temperature or humidity. This may result in malfunction, shorter
electronic life span, damaged battery and distorted parts.
5. DO NOT operate or store the scale in high temperature or
humidity conditions. The heat or moisture may interfere with the
scale's internal components.
6. DO NOT tamper with the unit's internal components. Doing so will
invalidate the warranty on the units and may cause damage. The
unit contains no user-serviceable parts.
7. This scale is an extremely sensitive weighing device. To avoid
damage to the unit or the battery, do not store anything on the
scale.
8. Remove the battery if the scale will not be used for a long period of
time.
9. Do not dispose of batteries in fire. Batteries may explode or leak.
Specifications
Capacity:
TE10C – 10 lbs x 0.1 oz / 5kgs x 1g
TE32C - 2 lbs x 0.1 oz / 1 kg x 1g
Dimensions: 5 7/8 x 6 5/8 x 1 ½"
Platform size: 5 7/8 x 4 3/4"
LCD digits: 0.5 inch
Type: 7 segment
Operates on: AC adapter (included) or one 9-volt battery (not included)
One Year Limited Warranty
This product is warranted against defects in materials or workmanship for
one (1) year from date of original purchase. It does not cover damages or
wear resulting from accident, misuse, abuse, or unauthorized adjustment
and/or repair. Should this product require service (or replacement at our
option) while under warranty, please pack the item carefully and return it
prepaid, along with receipt showing date of purchase and a note explaining
reason for return to:
Taylor Precision Products
2220 Entrada Del Sol
Las Cruces, New Mexico 88001
Customer Service Phone: 1-800-225-4834
Customer Service Fax: 1-505-526-4347
www.taylorusa.com
There are no expressed warranties except as listed above. This warranty
gives you specific legal rights, and you may also have other rights which
vary from state to state.
©2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading
the Way in Accuracy® are registered trademarks of Taylor Precision Products and its affiliated
companies. All rights reserved.
Made to our exact specifications in Taiwan.
NOT LEGAL FOR TRADE
Digital Scale
TE10C capacity: 10lb x 0.1 oz / 5kg x 1g
TE32C capacity: 2lb x 0.1 oz / 1kg x 1g
Leading the Way in Accuracy
Instruction Manual
TE10C/TE32C 7.06
TE10C / TE32C
®