Listening To Fm/Am Broadcasts - Denon AVR-X500 Owner's Manual

Contents

Listening to FM/AM broadcasts

1
Press TUNER to switch the input source to "TUNER".
TUNER
FM 87.50MHz
TUNE Tuning
CHANNEL Preset
GDisplay of this unitH
A1 FM 87.50MHz
2
Press BAND to select "FM" or "AM".
FM : When listening to an FM broadcast.
AM : When listening to an AM broadcast.
Front panel Display
Connections Playback
GTV ScreenH
AUTO
Now Playing
A1
BAND Band MODE Mode
MEMORY Memory
Rear panel
Settings
3
Press MODE to select tuning mode.
AUTO : Automatically search for and tune to a receivable radio
station.
MANUAL : Manually change the frequency one step at a time each
time the button is pressed.
4
Use TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
%
• The modes for receiving FM broadcasts consists of "AUTO" mode that
automatically searches available broadcast stations and "MANUAL" mode that lets
you tune in using buttons to change the frequency.
In "AUTO" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "MANUAL" mode to tune in.
Operation buttons
MEMORY
BAND
SHIFT
MODE
CHANNEL +, –
TUNE +, –
SEARCH
38
Remote
Tips Appendix
Function
Preset memory registration
Reception band switching
Preset channel block selection
Tuning mode switching
Preset channel selection
Tuning (up/down)
RDS search screen display
Index