Other - Denon AVR-X500 Owner's Manual

Contents
2 Pass Through
Selects how the AV receiver will pass HDMI signals to the HDMI
output in standby power mode.
On : Passes the selected HDMI input through the AV receiver's HDMI
output when the AV receiver is in standby power mode.
Off (Default) : No HDMI signals are passed through the AV receiver's
HDMI output in standby power mode.
2 Pass Source
The AV receiver will "pass through" the sources HDMI signal when
in standby.
Last (Default) : Choose this option to "pass through" the last used
HDMI input video source.
CBL/SAT / Blu-ray / GAME / AUX :
Choose this option to "pass through" the selected input source when
in standby.
%
• "Pass Source" can be set when "Pass Through" is set to "On".
Front panel Display
Connections Playback
Rear panel
Settings

Other

Make various other settings.
2 Auto Standby
Sets the time after which the unit automatically enters standby mode
when there are no audio or video signals input, and the unit is not
operated. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
2Hours : The unit goes into standby after 2 hours.
4Hours : The unit goes into standby after 4 hours.
8Hours (Default) : The unit goes into standby after 8 hours.
Off : The unit does not go into standby automatically.
2 Setup Lock
Protect settings from inadvertent changes.
On : Turn protection on.
Off (Default) : Turn protection off.
%
• To turn "Off" the "Setup Lock", follow the procedure below.
1. Press and hold SETUP for at least 3 seconds.
"Setup Lock:0On 1" appears on the display.
o p
2. Use to select "Off", and then press ENTER.
NOTE
• When "Setup Lock" is set to "On", no setting items are displayed except for
"Setup Lock".
61
Remote
Tips Appendix
Index