Samsung SND-5011 User Manual page 34

network connection and setup
3. In the <address> pane, provide the
necessary information.
• MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
camera will be set automatically so
you don't need to input it manually.
You can configure the static IP settings
`
M
only if the DHCP checkbox is unchecked.
if not using a Broadband router
For setting <ip address>, <Subnet mask>, and <Gateway>, contact your network administrator.
4. In the <port> pane, provide necessary
information.
• HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80. Use the spin button
to change the HTTP Port value.
• VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5. Enter the password.
This is the login password for the "admin" user who accesses the camera.
The default password is "4321".
The default password can be exposed to a hacking thread so it is recommended to change the
`
J
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
If you want to change the password, refer to "Administrator Password Change" of the user
`
setup. (page 74)
6. Click [oK].
Manual network setup will be completed.
34_ network connection and setup