Samsung SND-5011 User Manual page 20

installation & connection
3. While pushing the ratchet toward <unLocK>
direction outwards, turn the bracket to <unLocK>
direction using bottom groove to separate it.
installation
1. Use the provided screws (x3) to fix the bracket to
a desired position (ceiling or wall).
Ensure that the <FRONT> label on the bracket faces the
`
direction for camera monitoring.
2. Arrange the cables through the bracket to the
ceiling or wall.
If you intend to drill a hole in the installation site for the
`
wiring purpose, remove the wiring cover by force to reveal
a hole. Arrange the cables through the hole. If you intend
to arrange the cables without drilling a hole, use the empty
area opposite to the <FRONT> label side for the wiring
purpose.
3. Mount the main unit onto the bracket.
Align the marking hole of the main unit with the <front> label of the bracket, and
turn the unit in the <LocK> direction.
4. Adjust the lens in a desired direction.
For adjusting the lens direction, refer to "adjusting the monitoring direction for
the camera". (page 23)
5. Fix the cover to the main unit.
Fit the protruding part inside the cover into the corresponding hole of the main unit, and turn the
`
cover to fix it.
20_ installation & connection
Wiring Cover