Samsung SND-5011 User Manual page 12

overview
components
Item
Monitor to install
a
Reset Button
b
12_ overview
a
b
d
e
Using the test monitor cable, you can connect to a mobile display for camera
test.
Resets the camera settings to the default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
f
Description
c