Troubleshooting - Sony RCC1000 User Manual

______________________________________________________________________________

Troubleshooting

Problem
Camera is not responding to
controller
Some cameras can be
controlled but others cannot
All cameras are being
controlled simultaneously
LCD display is
malfunctioning.
Solution
Verify connections. If using RS232 connection,
verify you are plugged into VISCA IN of camera. If
using RS422 connection, verify wiring is correct
per 'Camera Connection Details' section in
manual.
Verify the baud rate is correct (should match baud
rate setting of camera)
Verify camera dip switch is correctly set to
communication mode being used with RCC1000
(RS232 or RS422)
Verify all connections/wiring is correct per 'Camera
Connection Details' section in manual.
Verify all connections/wiring are correct per
'Camera Connection Details' section in manual.
This can occur with static electricity. Unplug the
unit for a few seconds and repower.
RCC1000
user manual | 14