Attaching The Thermostat - Hunter 44277W Installation And Operation Manual

insTalling The ThermosTaT, ConT.
Lift the thermostat cover and set the
and the switch to AUTO.
FAN
1. Locate the
he/hg switch
the switch to
Set the switch to
(The switch has no effect when the system is set to cooling
mode.)
2. Locate the
Auto Recovery
thermostat. If you wish to use the Auto Recovery feature,
verify that the switch is in the ENABLE position. If you do
not wish to use this feature, simply change the switch
to the DISABLE position. See pages 44-45 for more
information.
3. System type - Locate the
back of the thermostat. Select either STD (Standard) or
HP (Heat Pump) to match your system.

ATTACHING THE THERMOSTAT

on the back of the thermostat. Set
(default) for gas furnace and oil burners.
HG
for electric furnaces.
HE
switch on the back of the
S
yStem
19
to
SYSTEM switch
t switch on the
ype
OFF