Attaching The Thermostat - Hunter SET & SAVE 44155C Installation And Operation Manual

inSTalling ThE ThErMoSTaT, ConT.
Lift the thermostat cover and set the
and the
FAN
1. Locate the
HE/HG switch
Set the switch to
burners. Set the switch to
(The switch has no effect when the system is set to
cooling mode.)
2. Locate the
Auto Recovery
thermostat. If you wish to use the Auto Recovery
feature, verify that the switch is in the ENABLE position.
If you do not wish to use this feature, simply change the
switch to the DISABLE position. See pages 44-45 for
more information.
3. System type - Locate the
back of the thermostat. Select either STD (Standard) or
HP (Heat Pump) to match your system.

aTTaChing ThE ThErMoSTaT

switch to AUTO.
on the back of the thermostat.
(default) for gas furnace and oil
HG
HE
switch on the back of the
S
yStem
19
SYSTEM switch
for electric furnaces.
t switch on the
ype
to
OFF