Auto Recovery - Hunter 44277W Installation And Operation Manual

iCons anD feaTures, ConT.
5. Auto recovery – allows heating and cooling
systems to gradually recover from an energy-
saving setpoint temperature to a comfort
setpoint temperature. Auto recovery calculates
the time needed to adjust the temperature to
the next program setting. When the thermostat
is in Auto Recovery mode, the display will flash
alternating messages of RECO and the time.
Auto Recovery can be disabled by sliding the
recovery switch on the back of the circuit board
to the disable position.
(Auto Recovery will not operate if Permanent or Temporary
holds are on.)
Press during the Auto Recovery
Hold/Return
process to manually cancel the recovery.
45