Attaching The Thermostat - Hunter 42710-01 Installation And Operation Manual

InSTAllInG THE THErMOSTAT, COnT.
lift the thermostat cover and set the
the FAN switch to AUTO.
1. Fan option - locate the
thermostat. Set the switch to
burners. Set the switch to
has no effect when the system is set to cooling mode.)
2. recovery - locate the
thermostat. If you wish to use the Auto recovery feature, verify
that the switch is in the EnABlE position. If you do not wish
to use this feature, simply change the switch to the DISABlE
position. See pages 44-45 for more information.
3. System type - locate the
back of the thermostat. Select either STD (Standard) or HP
(Heat Pump) to match your system.

ATTACHInG THE THErMOSTAT

SYSTEM
HE/HG switch on the back of the
HG (default) for gas furnace and oil
HE for electric furnaces. (The switch
A R switch on the back of the
UTO EcOvERY
S T switch on the
YSTEM YpE
19
switch to OFF and