Other Softkey Features That May Be On; Your Display - Lucent Technologies 6400 Series User Manual

Note: An error tone (one beep) sounds when you have made a mistake in
your softkey entries.
Press the Exit button at any time to exit softkey mode and return to
Normal (call-handling) Mode.
Other Softkey Features That May Be On Your Display
Figure 4 on the previous page shows the 12 default softkey features, those
features that can be accessed with the softkeys when the 6400 Series
telephone is initially installed. However, the system manager may substitute
other softkey features in their place. The following table is a list of some of
these alternate features and the feature abbreviation associated with each.
Note: The switch release to which your telephone is connected may provide
additional alternate softkey features.
Alternate Softkey Features
Abbreviation
Acct
AD
CFrwd
CPark
CPkUp
CnLWC
Cnslt
Count
Dpkup
Excl
GrpPg
IAuto
IDial
Inspt
Mark
Park
SAC
SFunc
Spres
Stats
Stop
Wait
Feature
Account Code Entry
Abbreviated Dialing buttons (can be multiple buttons)
Call Forwarding All Calls
Call Park
Call Pickup
Cancel Leave Word Calling
Consult
ACD Stroke Count (can be up to 10 buttons)
Directed Call Pickup
Manual Exclusion
Group Paging
Automatic Intercom
Dial Intercom
Inspect
AD Special Function Mark
Call Park to other Extensions
Send All Calls
Abbreviated Dialed Special Function
Abbreviated Dialing Suppress
ACD Agent Statistics
Abbreviation Dialing Stop/Indefinite Wait
AD Special Function Wait
7