Headpieces; Call-Handling Features - Lucent Technologies 6402 User Manual

Headpieces

The following headpieces can be used with these telephones:
®
— Mirage — Receiver fits over either ear. Not for noisy environments.
®
— StarSet — Eartip fits in ear canal.
®
— Supra Monaural — Adjustable headband and soft ear cushion.
— Supra Monaural Noise-Canceling (NC) — Same as above with
noise-canceling microphone that reduces background noise transmission
by up to 75 percent.
— Supra Binaural — Sound in both ears.
— Supra Binaural Noise-Canceling (NC) — Same as above with
noise-canceling microphone on flexible boom; features windscreen and
reduces background noise transmission by up to 75 percent.
Note: The privacy of the Whisper Page announcement cannot be
guaranteed when telephones have headset adapters other than the
M10L-8400 plugged into the Handset jack. The M10L-8400
(Comcode: 407639715; PEC: 3122-022) is the only headset adapter
that should be used for the 6400 Series terminals.For more
information, see the Whisper Page instructions in the Voice Features
section.

Call-Handling Features

Conference
The Conference feature allows you to conference up to six parties
(including yourself) on a call.
To add another party to a call (for a total of six parties)
1. Press
Present call is put on hold.
2. Dial the number of the new party and wait for an answer.
3. When you want to add the new person, press
All parties are now connected.
4. Repeat Steps 1 through 3 for additional conference connections.
To add a call you have put on hold to another call you are
connected to
1. Press
Red light next to
2. Press and then release the switchhook.
3. Press
All parties are now connected.
.
Conf
.
Conf
Hold
again.
Conf
blinks.
4
again.
Conf