3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
System board (see
●
Fan/heat sink assembly (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
Battery on page
47), and then remove the following components:
Optical drive on page
Hard drive on page
51)
WLAN module on page
Keyboard on page
59)
Top cover on page
62)
System board on page
Fan/heat sink assembly on page
48)
56)
81)
85)
Component replacement procedures
91