HP Pavilion G6 Maintenance And Service Manual page 57

Notebook pc
Hide thumbs Also See for Pavilion G6:
Table of Contents

Advertisement

Remove the hard drive:
1.
Disconnect the hard drive adapter cable from the system board (1) and then pull up on the tab
(2) to remove the drive from the hard drive bay.
NOTE:
If the rubber hard drive bracket is wedged into the hard drive bay snugly, you may need
to gently pry up the hard drive using a thin nonconductive tool.
2.
Disconnect the hard drive adapter (1). Then remove the hard drive bumpers (2), and the cover
(3).
Reverse this procedure to install the hard drive.
Component replacement procedures
49

Advertisement

Table of Contents
loading

Table of Contents