Creating A Tie; Saving Or Recalling A Preset - Extron electronics CrossPoint 450 Plus Series Setup Manual

Front Panel Operation
1 2 3 4 5 6 7 8 9 10 11 12
17 18 19 20 21 22 23 24 25 26 27 28
33 34 35 36 37 38 39 40 41 42 43 44
49 50 51 52 53 54 55 56 57 58 59 60
1 2 3 4 5 6 7 8 9 10 11 12
17 18 19 20 21 22 23 24 25 26 27 28
33 34 35 36 37 38 39 40 41 42 43 44
49 50 51 52 53 54 55 56 57 58 59 60
N The video selection button is labeled "RGBHV" on the
CrossPoint 450 Plus switcher BMEs and "Video" on the
MAV Plus switcher BMEs.

Creating a Tie

1. Press and release the Esc button to clear any button
indicators that may be lit.
2. Press and release the RGBHV/Video and/or Audio I/O
button(s) to select or deselect video and/or audio as desired.
Green when selected.
Off when deselected.
N Audio or video can be broken away (tied by itself) by
selecting only the RGBHV/video button or only the
Audio button.
3. Press and release the desired input button.
The button lights to indicate the selection.
5
4. Press and release the desired output button(s).
Amber indicates video and audio tie.
Green indicates video only tie.
Red indicates audio only tie.
3 4
3-2 CrossPoint / MAV Matrix Switchers • Front Panel Operation
Refer also to the CrossPoint 450 Plus / MAV Plus User's Manual at www.extron.com.
13 14 15 16
29 30 31 32
I
N
P
U
45 46 47 48 T
S
61 62 63 64
CONTROL I/O
VIEW VIEW VIEW ESC ESC ESC
ENTER ENTER ENTER PRESET PRESET PRESET VIDEO VIDEO VIDEO
13 14 15 16
30 31 32
29
O
U
POWER SUPPLY
T I/O CONFIG
P
PRIMARY
U
45 46 47 48
T REDUNDANT
S
61 62 63 64
I / O
Red when selected.
RGBHV AUDIO
Off when deselected.
8 Green indicates the need
ENTER
to confirm the change.

Saving or Recalling a Preset

AUDIO AUDIO AUDIO
CrossPoint / MAV Matrix Switchers • Front Panel Operation
5. Press and release the Enter button. All button indicators
turn off.
1. Save a preset — Press and hold the Preset button until it
flashes.
Recall a preset — Press and release the Preset button.
Save a Press and hold.
PRESET
preset
2 seconds
Preset button blinks.
Recall a
Press and release.
PRESET
preset
Preset button lights.
• All input buttons with assigned
presets light.
• The configuration data at assigned
preset locations will be overwritten.
1 2 3 4
17 18 19 20 21 22
2. Press and release the desired input button.
The button blinks to indicate that this
preset is selected to save or recall.
The Enter button blinks to
1
ENTER
indicate the need to
activate the save or recall.
3. Press and release the Enter button.
Refer also to the CrossPoint 450 Plus / MAV Plus User's Manual at www.extron.com.
PRESET
PRESET
5 6
3-3