Maintenance; Admin - D-Link DIR-505 User Manual

Section 3 - Router Mode
This page will allow you to change the password for the administrator account for coniguring the settings of the DIR-505. You
can also turn on graphical authentication(CAPTCHA) on this page. After making your changes, click the Save Settings button.
Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Verify
Enter the same password that you entered in the previous
Password: textbox in order to conirm its accuracy.
Enable Check to enable Graphical Authentication, or CAPTCHAs
Graphical
when logging in to the web UI of the DIR-505. This provides
Authentication: an extra layer of security by requiring you to enter a code
that is displayed on-screen.
Enable HTTPS
Check to enable HTTPS when connecting to the router for
Server: coniguration. When enabled, you will need to enter https://
to connect to the DIR-505. For example: https://dlinkrouter.
local..
Enable Remote
Management: Remote management allows the DIR-505 to be conigured over
the Internet through a web browser. A username/password is
still required to access the coniguration interface.
Remote Admin
Port: This is the port that will be used to access the DIR-505
coniguration interface when using remote management. You
will need to add this port number after the IP address.
Example: http://x.x.x.x:8080 where x.x.x.x is the IP address of
the DIR-505 and 8080 is the remote admin port.
D-Link DIR-505 User Manual

Maintenance

Admin

61