Manual Wireless Network Coniguration - D-Link DIR-505 User Manual

Section 3 - Router Mode
If you clicked Manual Wireless Network Setup on the Wireless Settings page, you will see this screen. Here, you can conigure
the wireless network settings of the DIR-505. After making your changes, click the Save Settings button.
Wireless When you are browsing for available wireless networks, this
Network
is the name that will appear in the list (unless Visibility Status
Name: is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
802.11 Mode: Select one of the following based on your needs:
• 802.11b Only: Select this if you are only using 802.11b
wireless clients.
• 802.11g Only: Select this if you are only using 802.11g
wireless clients.
• 802.11n Only: Select this if you are only using 802.11n
wireless clients.
• Mixed 802.11g and 802.11b: Select this if you are using
a mix of 802.11g and 11b wireless clients.
• Mixed 802.11n and 802.11g: Select this if you are using
a mix of 802.11n and 11g wireless clients.
• Mixed 802.11n, 802.11g and 802.11b: Select this if you
are using a mix of 802.11n, 11g, and 11b wireless clients.
Enable Auto
The Auto Channel Scan setting can be selected to allow
Channel Scan: the DIR-505 to choose the channel with the least amount
of interference.
Wireless
Indicates the channel setting for the DIR-505. The Channel
Channel: can be changed to it the channel setting for an existing
wireless network or to customize the wireless network. If you
enable Auto Channel Scan, this option will be grayed out.
D-Link DIR-505 User Manual

Manual Wireless Network Coniguration

43