Optical drive
NOTE:
The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW Double-Layer with SuperMulti Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the optical drive:
1.
Position the computer upside-down with the right side toward you.
2.
Loosen the captive Phillips screw (1) that secures the optical drive to the computer.
3.
Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
58
Chapter 4 Removal and replacement procedures
Battery on page
55).
Service cover on page
Spare part number
684330-001
684329-001
684328-001
57).