Seat Installation - Pride Mobility QUANTUM JAZZY Series Owner's Manual

INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Quantum Rehab Provider.

Seat Installation

It may be necessary to install the seat either prior to initial operation or after transporting your power chair. Most
seats are attached to the power base with the Universal Mounting System (UMS). The UMS consists of universal
parts that may be attached to any medium-back or high-back seat, regardless of seat width or seat depth. The two
main components are aluminum extrusions mounted to the seat base. These extrusions attach to a pair of trapeze
bars that are mounted to the power base. See figure 10.
NOTE: If your power chair is equipped with a Synergy Seat or a TRU-Balance Power Positioning System, refer
to the information provided in separate manuals.
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may
lose control of the seat if they do so.
REAR EXTRUSION
FRONT EXTRUSION
Figure 10. Seat Installation
Quantum Jazzy 1420 Series
I V . A S S E M B L Y
www.pridemobility.com
SEAT LATCH SAFETY
REAR TRAPEZE BAR
FRONT TRAPEZE BAR
21