Disassembly And Assembly - Pride Mobility Legend Owner's Manual

Legend
Hide thumbs Also See for Legend:
Table of Contents

Advertisement

I X .
D I S A S S E M B L Y A N D A S S E M B L Y
No tools are required to disassemble or assemble your Legend. Always disassemble or assemble your
Legend on a level, dry surface with sufficient room for you to work and move around your Scooter. Keep in
mind that the disassembled sections of the Legend takes up more floor space than the assembled Legend.
DISASSEMBLY
You can disassemble the Legend into six pieces: the seat, the front section, the rear section, the rear shroud,
and the batteries. You can also remove the utility tray to lighten the weight of the rear section if necessary.
Place the Scooter in an area where you have sufficient clearance to move the parts around. You need about
four or five feet in all directions. You may need assistance to lift some of the Scooter’s components. See IV.
“Specifications” for individual component weights.
1. Place the manual freewheel lever in the drive (down) position.
2. Unplug the charger, coil the cord, and store it in the rear compartment.
3. Push down on the seat lock lever to unlock the seat and lift the seat up and off of the Legend. See figure
17.
4. Gently lift the rear shroud off of the Legend. See figure 18.
5. Unplug the large, white, 9-pin front-to-rear harness. See figure 19.
6. Unplug both 2-pin, black and white battery harnesses and lift both batteries off of the Legend. See
figures 20 and 21.
CAUTION!
disassembly could result in permanent damage to the Legend.
7. If removing the utility tray, unplug the black 6-pin motor harness. See figure 22. The utility tray is held
in place with reusable fasteners; to remove it, gently pull the tray straight up and off the Scooter.
8. Grab the handle grip on the tiller, pull upward on the release lever, and gently lower the tiller down to
the center of the Legend chassis until it is fully lowered.
9. Remove both ball detent pins and lift up the frame lock levers. See figures 23 and 24.
10. Slide the front and rear sections apart. See figure 25.
FIGURE 17. SEAT REMOVAL
Legend
Failure to unplug both battery harnesses and the front-to-rear harness prior to
FIGURE 18. SHROUD REMOVAL
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents