Canon SELPHY DS810 Service Manual page 27

Photo printer
Hide thumbs Also See for SELPHY DS810:
Table of Contents

Advertisement

7, 9 times:
Alarm
7 to 10 times
More than 12
LED
times
8, 10, 12 times:
Power LED
5) After the function (menu) is selected, press the Power button. The Power LED lights, and the selected function is performed. (When
the operation completes, the printer returns to the menu selection mode automatically.)
Note: To exit the service mode, press the Power button.
<Destination settings procedures>
In the destination settings mode, press the Reset button the specified number of time(s) according to the destination listed in the table
below, and press the Power button.
After setting the destination, operate EEPROM initialization indicated in Service mode operation procedures above.
Time(s)
0 times
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times or more
Note: After setting the destination, confirm the settings in the service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
<Operation panel buttons / LCD monitor display checking>
After a mode is shifted to the operation panel button / LCD monitor display, check the panel buttons operation and the LCD monitor
display by implementing
the following procedures.
1) When the Stop / Reset button was pressed one time, the entire LCD monitor screen is changed to blue.
(If an error occurs, the Alarm LED lights.)
2) When each button (excluding Power, Stop / Reset, and OK button) on the operation panel is pressed, a part of screen is changed to
red accordingly.
For the color change (blue -> red) in the screen by each button operation, see the diagram below.
3) When all buttons excluding the Power, Stop / Reset, and OK button are pressed, the entire screen is changed to red.
Returns to the menu selection
LED
Power LED
No destination change
Alarm LED
JPN
Power LED
KRN
Alarm LED
US
Power LED
EUR
Alarm LED
AU
Power LED
ASA
Alarm LED
CN
Power LED
TW
Power LED
Returns to the destination settings mode
Destination
Paper setting
-
L
4 x 6
4 x 6
4 x 6
4 x 6
4 x 6
4 x 6
4 x 6
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents