Setting The Date And Time - Omron SpotArm i-Q132 Instruction Manual

2. Preparation
2.3

Setting the Date and Time

Your blood pressure monitor automatically stores up to 84 individual
measurement values with the date and time for each user.
To make use of the memory and average values functions:
• Set the unit to the correct date and time before taking a measurement
for the first time.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be reset.
Set the year, month, day, hours and minutes for the current date and
time.
(For details on changing the date and time setting, refer to "Adjusting
the Date and Time Setting".)
The weekly average buttons are used to set the date and time.
Use the buttons as described below to adjust the date and time setting.
Evening average button: Press this button to increase the value
Morning average button: Press this button to decrease the value
1.
Press the O/I button to turn
the power on. All items on the
display will appear briefly,
then the year digit will flash.
Note:
• The illustration to the right
shows the display when the
unit is used for the first time,
after the clock has stopped
or after replacing the batteries.
14
for the date/time setting.
for the date/time setting.