Using The Memory Function - Omron BF500 Instruction Manual

7.Using the Memory Function

7. Using the Memory Function
Measurement results are automatically stored in memory when you take a
measurement using a personal profile number button. In order to assist your tracking of
measurements, the device has stored 97 memories, and allows you to view the results
for only 1 day, 7, 30, and 90 days before.
When 97 sets of measurement values are stored in the memory, the oldest record is
deleted to save the most recent measurement values.
Notes:
• If you did not take a measurement on the exact date for 1, 7, 30, or 90 days before, the results
for the previous day are displayed. If there is no measurement result for the previous day, then
the results for the day before that are displayed. For example, when viewing the 7 days before
result, if there are no results for 7, 8, or 9 days before, then the result for 10 days before is used.
This is done for up to 14 days before the appropriate date.
• Only one set of measurement results is stored for each personal profile number each day. If
more than one measurement is taken during a day, the results from the last measurement are
stored.
Buttons Used in this Procedure
Personal profile number
button
Guest/Memory button
Press this button to view
previous results for only 1 day,
7 days, 30 days, and 90 days
before.
Body Fat button
Resting Metabolism button
Comparing Results After Taking a Measurement
1.
View the measurement results after taking a
measurement.
28
Personal profile number
button
Skeletal Muscle button
BMI button
Current weight/Body Fat
Percentage