Table of Contents
Advertisement
BURNER ORIFICE
Figure 63
Step 9. Reassemble the remaining components
by reversing the procedures outlined in the
preceding steps. Use pipe joint compound or
Tefl on tape on all pipe fi ttings before installing
(ensure propane resistant compounds are used
in propane applications, do not use pipe joint
compounds on fl are fi ttings).
Step 10. Attach the conversion label provided
in the conversion kit to the rating plate on the
appliance.
Step 11. Turn on gas supply and test for gas
leaks.
NOTE: INSTALL REAR BURNER FIRST,
BRACKET A
Note: The burners are not identical. Position them so
that the circular burner ports run as shown. Note
especially the vertical run of ports relative to the pilot
burner. Bracket A on the rear burner will interfere with
the pilot burner if an attempt is made to install the
rear burner in the front burner's position.
Figure 64
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
BURNER POSITIONING
THEN FRONT BURNER.
BURNER
REAR BURNER
FRONT BURNER
PORTS
PILOT
BURNER
35
Hide quick links:
Advertisement
Table of Contents
