Wireless Mac Filtering - TP-Link TL-WR940N User Manual

4.6.3

Wireless MAC Filtering

Choose menu "Wireless→MAC Filtering", you can control the wireless access by configuring the
Wireless MAC Address Filtering function, shown in Figure 4-21.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-22:
Figure 4-22 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
TL-WR940N/TL-WR941ND
Figure 4-21 Wireless MAC address Filtering
-40-
300Mbps Wireless N Router