TP-Link TL-WR940N User Manual page 99

Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click
the Enable button. If disabled, the function of DoS protection in Security settings will be
disabled.
Packets Statistics Interval （5-60） - The default value is 10. Select a value between 5 and
60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of
the packets statistic.
Select the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh the page.
Sorted Rules - Choose how displayed statistics are sorted
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Statistics Table:
IP/MAC Address
Packets
Total
Bytes
Current
Packets
Bytes
ICMP Tx
TL-WR940N/TL-WR941ND
Figure 4-83 Statistics
The IP and MAC address are displayed with related statistics.
The total number of packets received and transmitted by the Router.
The total number of bytes received and transmitted by the Router.
The total number of packets received and transmitted in the last Packets
Statistic interval seconds.
The total number of bytes received and transmitted in the last Packets
Statistic interval seconds.
The number of the ICMP packets transmitted to WAN per second at the
specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
-90-
300Mbps Wireless N Router