Panel Layout; The Front Panel - TP-Link TL-WR940N User Manual

1.4

Panel Layout

1.4.1

The Front Panel

The router's LEDs and the Wireless On/Off button are located on the front panel (View from left to
right).
Name Status
Off
PWR
On
On
SYS Flashing
Off
Off
WLAN
Flashing
Off
WAN,
On
LAN 1-4
Flashing
Slow Flash
WPS On
Quick Flash
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
TL-WR940N/TL-WR941ND
Figure 1-1 Front Panel sketch
Power is off.
Power is on.
The router is initializing or maybe has a system error.
The router is working properly.
The router has a system error.
The Wireless function is disabled.
The Wireless function is enabled.
There is no device linked to the corresponding port.
There is a device linked to the corresponding port but there is no
activity.
There is an active device linked to the corresponding port.
A wireless device is connecting to the network by WPS function.
This process will last in the first 2 minutes.
A wireless device has been successfully added to the network by
WPS function.
A wireless device failed to be added to the network by WPS
function.
Table 1-1 The LEDs description
-4-
300Mbps Wireless N Router
Indication