2.3.2 The Rear Panel
The Rear panel contains the following features. (Viewed from left to right:)
•
Wireless antenna
•
Factory Default Reset button
There are two ways to reset the Router's factory defaults:
Use the
1.
Router's Web-based Utility.
2.
Use the Factory Default Reset button: First, turn off the Router's power. Second, press
and hold the default reset button then turn on the Router's power, until the system LED
light up (about 3 seconds). Last, release the reset button and wait for the router to reboot.
Note: Ensure the Router is powered on before it restarts completely
•
WAN RJ45 port for connecting the Router to a cable or DSL modem
•
Four LAN 10/100Mbps RJ45 ports for connecting the Router to the local PCs
•
AC power socket: only use the Power adapter supplied with the TL-WR542G
54Mbps Wireless Router, use of a different adapter may result in product
damage.
TL-WR542G
Factory Defaults function on System Tools -> Factory Defaults page in the
WAN
RESET
Figure 2-2: Rear Panel sketch
54M Wireless Router User Guide
1
2
3
4
- 8 -