Remote Management - TP-Link TL-WR542G User Manual

Figure 5-30: Add or Modify a MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of
MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For
example: 00-0E-AE-B0-00-0B.
2. Type the description of the PC in the Description field. Fox example: John's
PC.
3. Status - Select Effective or Ineffective for this entry on the Status pull-down
list.
4. Click the Save button to save this entry.
To add additional entries, repeat steps 1-4.
When finished, click the Return button to return to the MAC Address Filtering page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Edit column.
Click the All Entries Effective button to make all entries effective.
Click the All Entries Ineffective button to make all entries ineffective.
Click the Delete All Entries button to delete all entries
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
Fox example: If you want to block the PCs with MAC Addresses 00-E0-4C-00-07-BE and
00-E0-4C-00-07-5F to access the Internet, first, enable the Firewall and MAC Address
Filtering on the Firewall page, then, you should specify the Default MAC Address
Filtering Rule "
Prevent
on the Firewall page and the following MAC Address filtering
ID MAC Address
1 00-E0-4C-00-07-BE
2 00-E0-4C-00-07-5F

5.8.5 Remote Management

You can configure Remote Management function on this page shown in figure 5-31. This
TL-WR542G
these PCs with effective rules from accessing the Internet "
Description
John's computer
Alice's computer
- 45 -
54M Wireless Router User Guide
table on this page:
Status
Effective
Effective
Modify
Modify Delete
Modify Delete