TP-Link TL-WR542G User Manual page 15

1) If you choose "PPPoE", you will see this page shown in figure 4-7:
User Name and Password - Enter the User Name and Password provided by your
ISP. These fields are case sensitive. If you have difficulty with this process, please
contact your ISP.
2) If you choose "DHCP", the Router will automatically get IP parameter from your ISP
without entering any parameter.
3) If you Choose "Static IP", the Static IP settings page will appear that shown in figure
4-8:
Note: The IP parameters should have been provided by your ISP.
IP Address - This is the WAN IP Address as seen by external users on the
Internet (including your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for WAN IP address, usually is
255.255.255.0
Default Gateway - Enter the gateway into the box if required.
Primary DNS - Enter the DNS Server IP address into the boxes if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this
field.
After you complete the above, click Next button, the Wireless settings page will appear,
shown in figure 4-9.
TL-WR542G
Figure 4-7: Setup Wizard - PPPoE
Figure 4-8: Setup Wizard - Static IP
- 14 -
54M Wireless Router User Guide