Chapter 2 Hardware Installation
2.1 Led indicators
The top panel contains LED indicators that show the status of the unit.
Name
Status
Off
On
Power
Flashing
SYS/WPS
Off
WAN
On
Flashing
LAN(1-4)
Off
Flashing
5GHz
Off
Flashing
2.4GHz
2.2 Back Rear Panel
The following parts are located on the rear panel.
Indication
Power is off.
Power is on.
the LED flashes about two minutes during WPS working.
There is no device linked to the corresponding port.
There is a device linked to the corresponding port but
there is no activity.
There is an active device linked to the corresponding port.
The wireless function is disabled.
The wireless function is enabled. The router is working on
5GHz radio band.
The wireless function is disabled.
The wireless function is enabled. The router is working on
2.4GHz radio band.
CR2 AC750 Wireless Dual-Band Router
5