Table of Contents
Advertisement
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable or DSL modem during installation. Usually, Don't change
anything here.
WAN MAC Address: This field displayed the current MAC address of WAN port, which
is used for WAN port. If your ISP requires that you register the MAC address, please
enter the correct MAC address into this field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
Your PC's MAC Address: This field displayed the MAC address of the PC that is
managing the Router. If the MAC address is desired, you can click the Clone MAC
Address button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory
default value.
Click the Save button to save your settings.
Note:
1)
Only the PCs on your LAN can use the MAC Address Clone feature.
2)
If you click the Save button, the Router will prompt you to reboot.
5.5 Wireless
Figure 5-9: Wireless menu
There are three submenus under the Wireless menu (shown in figure 5-9): Wireless
Settings, MAC Filtering and Wireless Statistics. Click any of them, and you can
configure the corresponding function. The detailed explanations for every submenu are
provided below.
TL-WR542G
Figure 5-8: MAC Address Clone
- 24 -
54M Wireless Router User Guide
Advertisement
Table of Contents
