Cisco Catalyst 4500 Series Message Manual page 128

SW-VLAN Messages
Error Message SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error:
call = [char] / file = [char]
Explanation
call.
Recommended Action
Error Message SW_VLAN-4-NO_PM_COOKIE_RETURNED: VLAN manager unexpectedly received a
null [char] type cookie from the Port Manager
Explanation
NULL pointer instead.
Recommended Action
Error Message SW_VLAN-4-STARTUP_EXT_VLAN_CONFIG_FILE_FAILED: Failed to configure
extended range VLAN from startup-config. Error [char]
Explanation
file. Configuration information for all extended-range VLANs will be lost when the system boots.
Recommended Action
Error Message SW_VLAN-4-VLAN_CREATE_FAIL: Failed to create VLANs [char]: [char]
Explanation
called a VLAN database routine to create one or more VLANs, but the Port Manager could not
complete the VLAN creation requests. A possible cause of this error is that the VLANs already exist
in the Port Manager as internal VLANs.
Recommended Action
Error Message SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error
[dec] from vtp function [char]: [char]
Explanation
software.
Recommended Action
Error Message SW_VLAN-4-VTP_INVALID_DATABASE_DATA: VLAN manager received bad data of
type [char]: value [dec] from vtp database function [char]
Explanation
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-108
/ code = [dec] ([char]) / bytes transferred = [dec]
The VLAN Manager received an unexpected error return from a Cisco IOS file system
This is an informational message only. No action is required.
The VLAN Manager queried the Port Manager for a reference cookie but received a
This is an informational message only. No action is required.
The VLAN software failed to use extended VLAN configuration in the startup-config
This is an informational message only. No action is required.
The VLANs specified in the error message could not be created. The VLAN manager
Contact your technical support representative.
The VLAN Manager received an unexpected error code from the VTP configuration
This is an informational message only. No action is required.
The VLAN Manager received invalid data from a VTP configuration database routine.
This is an informational message only. No action is required.
Chapter 2 Messages and Recovery Procedures
OL-11541-01