Portfanoutasic8X1000Hw-7; Portfanoutasic8X100Man Messages; Portfanoutasic8X100Man-4 - Cisco Catalyst 4500 Series Message Manual

PORTFANOUTASIC8X100MAN Messages

PORTFANOUTASIC8X1000HW-7

Error Message C4K_PORTFANOUTASIC8X1000MAN-7-LOSTPACKET: [char] port [dec] lost one
or more packets, [dec] transmitted [dec] received
PORTFANOUTASIC8X100MAN Messages
This section contains the Port Fan-out ASIC 8x100 Manager (PORTFANOUTASIC8X100MAN)
messages. This ASIC takes a gigabit port and fans it out to eight 100-Mb ports.

PORTFANOUTASIC8X100MAN-4

Error Message C4K_PORTFANOUTASIC8X100MAN-4-DIAGSFAILED: [char] failed diagnostics
Error Message C4K_PORTFANOUTASIC8X100MAN-4-FAILEDTOSENDLOOPBACKTRIES:[char] port
[dec] failed to send packet in [dec] tries
Error Message C4K_PORTFANOUTASIC8X100MAN-4-UNEXPECTEDLOOPBACK:
[char] sent out a loopback packet on port [dec], but it came back on port [dec]
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-80
A loopback packet was lost during online diagnostics of the module ASIC [char].
Explanation
This is an informational message only. No action is required.
Recommended Action
Explanation The module ASIC that is identified by [char] failed diagnostics.
Contact your technical support representative.
Recommended Action
The module ASIC [char] was unable to send a loopback packet on the module ASIC
Explanation
port [dec] for the decth time. The switch has insufficient memory; it will attempt to send a loopback
packet up to three times.
Contact your technical support representative.
Recommended Action
The module ASIC diagnostics for [char] sent the loopback packet out port [dec] and it
Explanation
came back on another interface [dec]. This condition is rare because the loopback is internal to the
hardware.
Contact your technical support representative.
Recommended Action
Chapter 2 Messages and Recovery Procedures
OL-11541-01