Chipset Configuration - ECS Motherboard User Manual

32
USB 2.0 (Enabled)
Use this item to enable or disable the USB 2.0 function.
USB Driver Select (Legacy USB)
Use this item to enable or disable support for legacy USB devices.
Press <Esc> to return to the Advanced Features page.
Chipset Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Main

Chipset Configuration

Setup Warning:
Setting items on this screen to incorrect values
May cause your system to malfunction!
System Memory Frequency
Dram Timing Selectable
RAM CAS# Latency
RAM RAS Act. to Pre.
RAM RAS# to CAS# delay
RAM RAS# Precharge
Refresh Cycle Time
Refresh Mode Select
System Memory Frequency (Auto)
Use this item to enable or disable the frequency of system memory.
Dram Timing Selectable (Default)
Use this option to determine if the memory timings should be read from SPD or set
up manually.
RAM CAS# latency (5)
This item determines the operation of DDR RAM memory CAS (column address
strobe). It is recommended that you leave this item at the default value.
RAM RAS Act. to Pre (15)
Depending on your SDRAM module structure, the 4-Way setting can offer the best
performance. If you choose the wrong setting, the computer system will not run in
a stable number.
RAM RAS# to CAS# delay (02)
This item specifies the RAS# to CAS# read write delay time to the same bank.
RAM RAS# Precharge (02)
This item specifies the RAS# precharge time.
Refresh Cycle Time (0)
This item means Refresh cycle time.
InsydeH2O Setup Utility
Advanced Power Security
<Auto>
<Default>
<5>
<15>
<02>
<02>
<0>
<15.6 us>
Using BIOS
Boot Exit
Allows override of
detected memory
frequency value.
+ -
Select Boot Device
<>
Selecct Screen
Select Item
Select SubMenu
Enter
Setup Defaults
F9 =
Save and Exit
F10 =
Esc = Exit