Boot Configuration; Peripheral Configuration - ECS Motherboard User Manual

Boot Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Main Advanced

Boot Configuration

Numlock
Zip Emulation Type
FDD Controller
FDD Write Protect
HALT ON
Numlock (On)
The item selects Power-on state for Numlock.
Zip Emulation Type (FDD)
The item shows the type of zip emulation.
FDD Controller (Enabled)
The item enables or disable the floppy disk drive interface.
FDD Write Protect (Disabled)
The item enables or disable the FDD write protect function.
HALT ON (No Error)
This item defines the operation of the system POST(Power On Self Test) routine.
You can use this item to select which types of errors in the POST are sufficient to
halt system.
Press <Esc> to return to the Advanced Features page.
Peripheral Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Main Advanced

Peripheral Configuration

Serial Port A
Parallel Port
Mode
Azalia
Realtek LAN
InsydeH2O Setup Utility
Power Security Boot
<On>
<FDD>
<Enabled>
<Disabled>
<No Error>
+ -
Select Boot Device
<>
Selecct Screen
Select Item
Select
Enter
Setup Defaults
F9 =
F10 = Save and Exit
Exit
Esc =
InsydeH2O Setup Utility
Power Security Boot
<Auto>
<Auto>
<ECP>
<Auto>
<Enabled>
+ -
Select Boot Device
<>
Selecct Screen
Select Item
Select
Enter
Setup Defaults
F9 =
F10 = Save and Exit
Exit
Esc =
Using BIOS
Exit
SubMenu
Exit
SubMenu
29